Readme: Raw EEG to ERP
Data for P18 were withdraw.
data for P17 not available due to equipment failure.

1. Decimate the EEG data to 512hz using the biosemi decimator tool.
2. Read BDF file into EEGlab, make HEOG and VEOG channels.
3. Filter the data with a butter filter .01 high pass 30 low pass. 
4. Edit channels to match electrode cap
5. Average reference the channels
6. Create event list and use bin-lister file to label EEG
7. Segment the data into epochs -200-1200ms,  use baseline from -200 to stimulus onset
8. Run ICA
9. After ICA, look at each individual epoched-EEG check, components for eye artefacts and remove the eye artefacts using EEG
10. Remove EEG crown electrodes and re-reference the data to average reference
11. Conduct a threshold rejection below -100uv and above 100uv
12. Computer ERPs in ERPlab